Abstracts – Browse Results

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 10 results ...

Almazrouei, M, Khalizani, K and Davidson, R (2021) Safety climate of UAE petroleum industry: a cross-validation using confirmatory factor analytic approach. Journal of Engineering, Design and Technology, 19(4), 943-65.

Amin, F, Ghazi, M, Sotoodeh, A F and Nikian, M (2021) Economic optimization of heat exchanger networks based on geometric parameters using hybrid genetic-particle swarm algorithm technique. Journal of Engineering, Design and Technology, 19(4), 989-1015.

Ayed Eid, A (2021) Effect of the transversal-spacing of stirrup-legs on the behavior and strength of shallow concealed RC beams. Journal of Engineering, Design and Technology, 19(4), 932-42.

Hamza, H and Alshibani, A (2021) A multi-criteria decision-making model for selecting curtain wall systems in office buildings. Journal of Engineering, Design and Technology, 19(4), 904-31.

  • Type: Journal Article
  • Keywords: automation; communication; control system; electrical engineering; equipment; performance; utilities; control system
  • ISBN/ISSN:
  • URL: http://dx.doi.org/10.1108/JEDT-04-2020-0154
  • Abstract:
    The purpose of this paper is to develop a model that facilitates the evaluation and selection processes of curtain wall systems used in office buildings. A comprehensive literature review and interviews with local experts were conducted to identify common types of curtain wall systems used in office buildings and their selection criteria. A questionnaire was designed and completed using multi-criteria decision-making techniques through face-to-face meetings with consultants in the Eastern Province of Saudi Arabia. The proposed model was implemented in prototype software as a proof of concept. The results revealed that fire resistance scored the highest weighting of all the criteria. Furthermore, precast concrete cladding panels were found to be the best system for use in office buildings located in the Eastern Province of Saudi Arabia. The model validation reveals that the score for any curtain wall system varies depending on the nature of the project and that the prioritisation of criteria can vary from one practitioner to another. The model captures the knowledge of professionals who are experts in the prioritisation of criteria for selecting curtain wall systems. The research design presented expands the boundaries of knowledge of the relevant literature, through demonstrating a conceptual framework incorporating different techniques into a computerised model. It has practical implications through presenting a systematic procedure for developing and adopting a computerised decision-making tool, which aligns experts' professional practice and requirements, for use in selecting fragmented options.

Magoda, C M, Gryzagoridis, J and Kant, K (2021) Effective heat conductivity of Honeycomb (porous) composite panel. Journal of Engineering, Design and Technology, 19(4), 876-87.

Moniri, M R, Akbar Alem, T, Ayough, A and Zandieh, M (2021) Turnaround project risk assessment using hybrid fuzzy SWARA and EDAS method: case of upstream oil process industries in Iran. Journal of Engineering, Design and Technology, 19(4), 966-88.

Muleya, F, Mulenga, B, Sambo Lyson, Z, Nwaubani, S, Chipozya Kosta, T and Mushota, H (2021) Investigating the suitability and cost-benefit of copper tailings as partial replacement of sand in concrete in Zambia: an exploratory study. Journal of Engineering, Design and Technology, 19(4), 828-49.

Pieters, W D and Tzoneva, R (2021) Investigation of an IEC 61850 standard-based process bus implementation of a protection and control scheme for parallelly connected transformers. Journal of Engineering, Design and Technology, 19(4), 850-75.

Titus, E K, Aigbavboa, C O and Wellington Didibhuku, T (2021) Clusters of key barriers to life cycle assessment adoption in the South African construction industry: perspectives of stakeholders. Journal of Engineering, Design and Technology, 19(4), 888-903.

Umar, M, Michael Ikpi, O, Auwal Sani, A and Abubakar Garba, S (2021) Modelling of mechanical properties of Pa6 based reinforced graphite and graphite nano platelets composites using different aspect ratio. Journal of Engineering, Design and Technology, 19(4), 809-27.